Product Description
This high-torque shaft driven Pitts Electric Clutch will give your operator control over your hydraulic system.
Clutch Specifications:
- Power: 91 Watts
- Max RPM: 3600
- Max Static Torque: 550 pound-feet
- Pump Shaft Size: ""C"" Spline 1-1/4 inch 14T 12/24 DP
Mounting Bracket 13256 (sold separately)
Pitts Clutch Catalog 2021 - Diagram for this clutch is on page 27.
Drive flange bolt pattern and pilot diameter on clutch are dimensioned to correlate with ""Spicer"" type 1350 - 1410 series drive shaft flange connections.
Proper drive shaft selection is important. Consult with draft shaft manufacturers specifications for each specific application requirement. Drive shaft alignment must be within 3 degrees.
Important installation step: Clutches require a short burnishing period to generate the rated torque. To burnish, install the clutch and run at 1000 to 1200 RPM. Cycle on/off at the rate of 5 seconds on - 5 seconds off for a total of 25 cycles.
